2060-771640-002

March 22, 2012

1. Looking for WD Royl PCB: 2060-771640-002 Rev P2

2. Wester Digital PCB 2060-771640-002 REV P2

I’m looking for western digital PCB version: 2060-771640-002 REV P2

2060-771640-002

-the PCB must have the exact version number
-in good working condition without cracks / burns / missing components

3. WD5000AADS-00S9B0 PCB burned, need replacement & soldering

A customer’s Western Digital drive isn’t spinning or being detected by BIOS.
Model: WD5000AADS-00S9B0 {1 platter, yay!}
Date: 06 AUG 2010
DCM: HBRCNT2AGB
DCX: 5007S9495
Made: In Thailand
PCB Marking: 2060-771640-003 REV P1
PCB Sticker: 2061-771640-N03 02P
Customer’s house had a power surge, and his power supply and motherboard blew. On the hard drive PCB, the Smooth L7251 3.1 is clearly fried, and a few other parts are possibly discolored. In the process of frying, this chip melted the foam pretty well in the area. It does have an 8 pin EEPROM at U12. Hopefully the EEPROM is unaffected. Also, hopefully it died before affecting the motor and/or heads.
I already had another WD5000AADS-00S9B0, but unfortunately it’s PCB is 2060-701640-001 REV A {2061-701640-300 AAD1}, and is the version without an 8 pin EEPROM at U12. (As expected, no luck with it.)
Do you have the correct PCB available? If so, what would you charge for it — and for you to move the EEPROM over if I mailed you the fried PCB? I have very limited soldering experience and would prefer to have both taken care of.

Buy WD 2060-771640-002 pcb board on HDDZone.com