Western Digital 2060-771940-002 SATA board PCB
Board Number: 2060-771940-002
Board Version: REV A, REV B, REV C, REV P1, REV P2 (They are compatible! Ship randomly.)
Category: Western Digital HDD PCB > Western Digital SATA PCB
WD PCB boards compatibility: Western Digital PCB swap guide
Before you purchasing please read:
1. These are just PCB (Printed Circuit Boards/Electronics Boards), not the whole HDD (Hard Disk Drive);
2. Most of the PCB are second hand. However, all boards have been fully tested before shipment;
3. All PCB are used as data recovery/repair issues, there is no refund/exchange policy;
4. It is a buyer responsibility to know if the board is adequate for his hard drive model;
5. In most cases, you should exchange the BIOS/Main Controller IC before you swap hard drive PCB, in order to make the replacement board compatible with your HDD.
6. Hard drive failures are NOT always caused by PCB failure. We cannot guarantee your drive to be repaired by replacing the hard drive PCB;
T6/T8 Star Screw Driver
If you don't have the suited screw driver to take off PCB from HDD, you can order one with the PCB. We will deliver the matching screw driver with your PCB.