help, please – pcb

Looking to get replacement toshiba 1tb pcb, as per the following:

MQ01UBD100

AA00/AX001U,

HDKBD09AYA01

23OXSHAWS TS8

25X40BL bios

Please provide quote?

Please send your PCB’s clear photos to check.

Replacement the PCB will not solve the problem below.

    * The drive will power up normally (no ticking noises, errors etc) but will not be recognized by the computer

    * The drive will power up normally and be recognized correctly but will report a size of 0 bytes

    * The drive will power up but report SMART errors on boot

Those problem is caused by the HDD firmware corrupted.You can find a data recovery company help.

Because it stopped working ONLY when the usb connector fell off…… (it still worked prior to it falling off, just it made noises on the lead up to this – possibly because the usb connector was becoming detached though?

See attached the issue – photo.

MQ01UBD100 Toshiba PCB G003296A is your donor PCB.

When you get this PCB, you need to move your original PCB’s BIOS to the replacement PCB.