Help, please – pcb

Looking to get replacement toshiba 1tb pcb, as per the following:

MQ01UBD100

AA00/AX001U,

HDKBD09AYA01

23OXSHAWS TS8

25X40BL bios

Please provide quote?

Please send your PCB’s clear photos to check.

G003296A

MQ01UBD100

AA00/AX001U,

HDKBD09AYA01

23OXSHAWS TS8

The reason, it started

– making clicking noises upon connection

– still spinning though and would work

Then the usb connector fell off

2 bios (8pin) chips are contained:

25X40BL

25C20BL

(i replaced a board of the same G003296A already and yes it powered up but no data was available etc, hence searching of the same bios. to prevent soldering being required and potential mistakes etc)

Replacement the PCB will not solve the problem below.

    * The drive will power up normally (no ticking noises, errors etc) but will not be recognized by the computer

    * The drive will power up normally and be recognized correctly but will report a size of 0 bytes

    * The drive will power up but report SMART errors on boot

Those problem is caused by the HDD firmware corrupted.You can find a data recovery company help.