Several pcb that are similar to my hdd

I am checking your website for pcb and noticed there were several pcb that are similar to my hdd. Can you please show me your pcb available that matches my hdd specifications below

maxtor diamondmax 21 stm3160815as 160GB

maxtor hdd

pcb number:100428473 REV B

inside pcb:

ogere

100404226

Seagate

0712T 2415817

A4

100367028

I noticed that my hdd is maxtor brand and the pcb is seagate (cloned). Are Seagate and Maxtor both compatible and interchangeable brands? Do you have pcb that would work on my Maxtor hdd. If so, please let me know what do you have that is available for sale that would work. Your response to my concerns/issues is greatly appreciated.

Please send your PCB’s clear photos to check.

Thank you for last message below. I appreciated it.  I enclosed two photos of the pcb. Click on the above attachments. If you cannot see clearly of the photos, let me know either way.  I am not a photographer. If you feels that is not enough description as to what type of pcb, see the description below of the name type that I submitted earlier to verify the correct information I gave you. I am waiting for your response. Thank you for your time and consideration in this matter.

Seagate 100428473 PCB is your donor PCB.

When you get this PCB, you need to move your original PCB’s BIOS to the replacement PCB. The 8pins (4 pins on each sides) with 25P05VP、25P10VP、25F512、25F1024、25F1024AN、SST25VF512、SST25VF010, etc. are the BIOS.

Thank you so very much for your last message below. I appreciated it. I am not aware of firmware/bios need to be transfer from the original pcb to the replacement pcb. I do not have this hot air rework tool that is require to remove the firmware/bios.

After reading your website removing bios/firmware and using the hot air rework tool video, this is all new to me. I am afraid to ruin the bios/firmware chip removal process, even though I do not have hot air rework tool.

Does your company do repairs/replacement work on  pcb bios/firmware? I can send you my original pcb through regular mail and your company can do the work on replacing the pcb and replacing the bios/firmware of my original pcb to replacement pcb bios/firmware.  Can that be done? If not, would you know of any company do this kind of work? Your response is greatly appreciated.

We just sell PCB.

You can move the BIOS from your original PCB by using hot-air gun, then soldered it on the replacement board. Please refer: hard drive pcb firmware transfer  Or you can find an electronics repair shop help you.