wd 20nmvw 2TB

June 8, 2017

Q; hello. i have wd 20nmvw 2TB hard disk. but the the usb port on board

is broken. can you please tell me will the hard drive work again  if i

change only usb jack on board or desolder the old jack back on board.

or i need change the board for fixing my drive?

A: Swpping PCB and changing the BIOS is easier then change the USB port. You can refer: http://www.hddzone.com/conditions.html and choose the correct donor PCB from our webiste. When you get the PCB, you can move the BIOS from your original PCB by using hot-air gun, then solder it on the replacement board. Please refer: http://www.datarecoveryunion.com/hard-drive-rom-chip-swapreplacement/.  Or you can find an electronics repair shop help you.