WD30NPRZ-00YRMT0 WD PCB 2060-800022-000

Starting at: $46.00

Model: WD100306_WD30NPRZ-00YRMT0
Shipping Weight: 75g
34 Units in Stock

Please Choose:

Tool (select if you need)

T6/T8 star screw driver (Used for unscrew PCB from HDD) ( +$3.00 )

Add to Cart:

Product Description:

WD30NPRZ-00YRMT0 Western Digital (WD) HDD PCB Board Hard Drive Logic Controller Circuit Board 2060-800022-000, replacement WD HDD WD30NPRZ-00YRMT0 parts for data recovery/HDD repair purpose.

PCB Number: 2060-800022-000; (REV A, REV P1 & REV P2 are compatible, ship randomly)
Suit for Western Digital HDD: WD30NPRZ-00YRMT0;

WD PCB compatibility: Swap Western Digital PCB

WD30NPRZ-00YRMT0 WD PCB 2060-800022-000

A hard disk drive (HDD), hard disk, hard drive, or fixed disk, is an electro-mechanical data storage device. The "hard drive pcb" is also called "hard drive logic board", "hard drive controller board", "hard drive circuit board", or simply "hard drive board". This is the (often green) printed circuit board attached to the bottom of your hard drive. You can repair your defective hard disk drive by changing or replacing the circuit boards.

T6/T8 Star Screw Driver
If you don't have the suited screw driver to take off PCB from HDD, you can order one with the PCB. We will deliver the matching screw driver with your PCB.

Before you purchasing please read:

1. This is just a hard drive circuit board (PCB, Logic board), not the whole hard drive;
2. HDD PCB board number is printed on the board, not on the sticker;
3. These boards are USED, NOT brand new, the circuit board components not falling, the interface did not break. All PCBs have been tested before shipping;
4. It is used for data recovery/repair issues, the PCB board has been tested and in good working condition. There is no refund/exchange policy;
5. You should swap the BIOS chip before you exchange the PCB boards, as our guide sticker shown, in order to make the replacement board compatible with your hard drive;
6. It is the buyer's responsibility to know whether the board is adequate for his hard drive model;
7. Hard drive failures are NOT always caused by PCB failure. We cannot guarantee your hard drive to be repaired by replacing the hard drive PCB;

PCB Data Sheet: WD30NPRZ-00YRMT0 Western Digital 3TB SATA 2.5" Hard Drive PCB

Frequently Asked Questions:

Q: How to contact us?
Please feel free to email us sales@hddzone.com if you have any questions.
Note: Send clear photos of your PCB (both sides) to us will make everything easier! (Mail with attachments)

Q: REV A, REV B, REV C, REV D, REV E, REV P1, REV P2, 00, 01, 02 are they compatible with each other?
A: Yes! They are different board versions, but they are compatible! We will ship randomly. Please leave a message if you want a special revision, thank you!

Q: Main Controller IC and HDD Motor Combo IC are differnt with your listed here, does it matter?
A: No! They are just for reference, the same PCB board may have differnt Main Controller IC(The biggest chip) and HDD Motor Combo IC(SMOOTH chip). We can't list them all, but they are compatible!

Q: Can you ship to my country and how much?
A: Yes! HDDZone.com can ship to worldwide and it is free! It will take about 7-20 working days! If you need the PCB urgently or you are data recovery company, suggest you choose the delivery way by Expedited Shipping, it will take about 3-7 working days.

Q: Is this PCB compatible with my HDD model?
A: We can't list all the compatible HDD models for every PCB. To find the matching PCB, you'd better unscrew the hard disk with a screwdriver to find the correct "board number", "main controller chip" or "white pager number" (How to find a matching PCB). The same serie but different capacity(such as WD1200BEVT, WD1600BEVT, WD2500BEVT...) hard disks are usually used with the same PCB. Common hard disk capacity: 20G, 30G, 40G, 60G, 80G, 120G, 160G, 200G, 250G, 300G, 320G, 400G, 500G, 750G, 1TB, 1.5TB, 2TB, 3TB, 4TB. Note: The same model of hard disk may use a different PCB.