See Additional Content Below

The hard drive PCB, or HDD PCB, is the Printed Circuit Board that is screwed into the back of the hard disk drive. If you have ever handled a hard drive, you may recognize the PCB as the green or blue board on the bottom of the HDD. The main function of the PCB is to supply power to the hard disk, data signal processing, etc. The main components are the "main controller chip", the "motor control chip", the "ROM chip", the "cache chip", and the interface.

Customer Reviews:

"Just wanted to say i received (PCB board 100762568), soldered BIOS chip to new board you sent and it worked great. Thanks!" - Jeff Stone - United States

Hard Drive PCB Circuit Boards Repair:

Most HDD PCBs' failures are caused by Motor Controller Chip burnt, then the TVS diodes burnt and Main Controller IC burnt.

In most cases, Motor Controller chip burnt can be seen by eyes. We can see a burnt hole or raised part on it. TVS diodes' short circuit can be test by a multimeter. Main Controller IC is difficult to be test. Burnt TVS diodes or Motor Controller IC can be repaired by using the same model chip or diodes. Of course, this operation is just be used by the technicians who has the Circuit board repair knowledge. For common user, the best way is swapping HDD PCB boards.